One Line Comment Style¶

Many users have raised concerns about the complexity of defining Sphinx-Needs need items with RST in source code. Therefore, CodeLinks provides a customizable one-line comment style pattern to define need items to simplify the effort required to create a need in source code.

Here is the default one-line comment style.

Additional examples and use cases:

For more comprehensive examples and advanced configurations, see the test cases.

Start and End sequences¶

To have a better understanding of the syntax of a one-line comment, we will break it down as follows:

start_sequence defines the characters where the one-line comment starts. end_sequence defines the characters where the one-line comment ends.

The text between start_sequence and end_sequence contains the fields of a need item.

field_split_char¶

Since there are always multiple fields for a need,

field_split_char defines the character to split the text into multiple pieces/fields.

needs_fields¶

Each field in a need may have different data types. It could be a string if it is a field for id or title. On the other hand, it could be a list of strings as well, if the field requires a list of strings to represent links.

This is where needs_fields comes in.

needs_fields contains the fields that are required for needs:

Each need field defines its:

name
data type (Optional)
default value (Optional)

The examples in the following sections use the default to explain the syntax of the one-line comment.

DataType¶

By default, a field has the data type of str.

For example, if the field definition is as follows:

{
    "name": "title
}

It’s equivalent to:

{
    "name": "title",
    "type": "str"
}

If the field is expected to have a list of strings, it shall be defined as the following:

{
    "name": "links",
    "type": "list[str]"
}

When the field has data type list[str]:

the strings must be given within [ and ] brackets
, shall be used as the separator.

For example, with the following needs_fields configuration:

python
toml

needs_fields = [
   {"name": "title"},
   {"name": "id"},
   {"name": "type", "default": "impl"},
   {"name": "links", "type": "list[str]", "default": []},
],

needs_fields = [
   { name = "title" },
   { name = "id" },
   { name = "type", default = "impl" },
   { name = "links", type = "list[str]", default = [] },
]

the one-line comment shall be defined as follows:

// @ title, id_123, implementation, [link1, link2]

.. implementation:: title
    :id: id_123
    :links: link1, link2

Default value¶

The value mapped to the key default in a need field definition is the default value of a need field when it is not given in the need definition.

For example, with the following needs_fields definition,

python
toml

needs_fields = [
   {
      "name": "title"
   },
   {
      "name": "type",
      "default": "implementation"
   },
]

needs_fields = [
   { name = "title" },
   { name = "type", default = "implementation" }
]

the following need definition in source code is equivalent to RST shown below:

// @ title here and default is used for type

.. implementation:: title here and default is used for type

Positional Fields¶

All of the fields defined in needs_fields are positional fields. This means the order of needs_fields determines the position of the field in the one-line comment.

For example, with the mentioned needs_fields definition

field title is the first element in the list, so the string of the title must be the first field in the one-line comment.

// @ this is title, this is id, this_type, [link1, link2]

.. this_type:: this is title
   :id: this is id
   :links: link1, link2

Note

A field without a default value cannot follow a field that has a default value set.

Escaping Characters¶

If the value of the field contains characters that are field_split_char or angular brackets [ and ],

a leading character \ must be used to escape them.

For example, with the mentioned needs_fields definition, , is escaped with \ and is not considered as a separator.

// @ title\, 3, IMPL_3 , impl, []

.. impl:: title, 3
   :id: IMPL_3

The other example shows the angular brackets [ and ] and comma being escaped:

// @ title 3, IMPL_3 , impl, [\[SPEC\,_1\]]

.. impl:: title 3
   :id: IMPL_3
   :links: [SPEC,_1]

To have a backslash \ as a literal in the value, use \\ as shown in the following:

// @ title\\ 3, IMPL_3 , impl, [\[SPEC\,_1\]]

.. impl:: title\ 3
   :id: IMPL_3
   :links: [SPEC,_1]

Caution

Field values can never contain any newline characters \r or \n.

Invalid markers¶

A line that starts like a marker but does not fit the style creates no need, and is reported as one of these kinds, the kind leading the message:

too_few_fields – fewer fields than the style requires (the fields with no default): 1 given fields, minimum is 2;
too_many_fields – more fields than needs_fields defines: 5 given fields, maximum is 4;
missing_square_brackets – a list[str] field given without [ and ];
not_start_or_end_with_square_brackets – a list[str] field whose brackets are not its first and last characters, such as [REQ_1];;
newline_in_field – a field holding a newline (not produced from a source file, which is parsed one line at a time).

A line with nothing between the start and end sequences is not a marker. A marker that fits the style but whose need Sphinx-Needs refuses – an id that does not match needs_id_regex, say – is reported too, with the Sphinx-Needs reason leading the message: invalid_id: one-line need could not be created: Given ID 'b' does not match configured regex '^[A-Z0-9_]{5,}'.

In a build, the src-trace directive reports each at the marker’s file and line, relative to the git root (else the source directory), as a codelinks.oneline warning:

src/x.cpp:3: WARNING: too_few_fields: 1 given fields, minimum is 2 [codelinks.oneline]

The build goes on, without that need; with -W it fails. One entry, suppress_warnings = ["codelinks.oneline"], silences them all. A project that no src-trace directive traces creates no needs, and reports none. A file that two directives’ scopes share is analysed by each, and each reports its markers. codelinks analyse prints the parser’s kinds to the console; it creates no needs, so a need Sphinx-Needs refuses is reported by a build only.

A one-character start sequence without the field separator is not a marker. When the start sequence is a single character – the default @ – and the text after it holds no field_split_char, while the style requires more than one field, the line is left alone: no need and no warning. That is what keeps documentation tags quiet on the default style:

/**
 * @brief Does a, IMPL_1
 * @param x the value
 * @return nothing
 */

@param x the value and @return nothing are not markers; @brief Does a, IMPL_1 has the separator, so it is the need IMPL_1 titled brief Does a, as it always was. A tag line that does contain a comma is read as a marker, and warns if it does not fit the style, or if it fits but Sphinx-Needs refuses the need – an id that does not match needs_id_regex, say. A multi-character start sequence such as [[ is specific enough to be a marker on its own, so [[ only-title ]] on a style requiring two fields warns too_few_fields.